video y cable
video y cable resources on http://www.lowvoltagewire.com include information about video cable connected, and more. Must see to believe.
video y cable : Articles
 At reasonable volume levels, the voltage level to the speakersis about the same as the line level - the difference is impedance, thereforepower. I used four coax cables(for red, green, blue, and sync signals - or, any one could be used forcomposite video instead), two signal-level cables (stereo audio in / audioout), and a 22-gauge 4-conductor cable for elan/audioease compatibility. I will cover thetaped numbers with clear heat-shrink tubing for permanence. When projecting, you can use lightswitches and wall sockets as fiduciary marks to line up your slide. It is designed to work with cat5 and willtake two stereo (or four mono) rca inputs and put them on the utp cable. I was told to keep holesaway from the bearing point at least three times the height of the joist.
| video y cable info: However, i found it more useful andconvenient to use the first digit for the node location (0 for basement, 1 formedia room, 2 for security center, 3 for all other point-to-point wires) andthe other two digits just sequential regardless of wire type. If the 20-gauge nature of this wire seems small, try dissecting astandard patch cable normally provided with a cd player or similarequipment for connection to the amplifier - talk about hair-thin wires!Media room audiosince most critical listening and higher volumes are used in the media room,soundtrack designed in larger gauge speaker wires for the main speakers -14 gauge wire pairs. See also security cables, and video y cable related pages. |
|
